here
2650.rar
Sep 9, 2010
Related Posts
Hari's DCT4 CALC V2.4download here : Hari's DCT4 CALC V2.4 ... readmore
Nokia 1661 Hardware Solutions By PAk-Gsm
Nokia 1661 Hardware Solutions By PAk-Gsm______________________________________
download ... readmore
Here is pinout for over 50 models Nokia Here is pinout for over 50 models Nokia
__________________________________
Download link :
FileBox ... readmore
All Nokia x3 SolutionNokia x3 USB Charger Solution
Nokia x3 sim solution
Nokia x3 signal solution
Nokia x3 pinout
Nokia x3 mic solution
Nokia x3 keypad solution
Nokia x3 keypad or lcd no light solution
nokia x3 charger not supported solution ... readmore- Nokia charging solutions by Mehmood Riaz.exeNokia charging solutions by Mehmood Riaz.exe
_________________________________
download ... readmore
N95 8GB UNLOCK Successfully done.
Searching for UFS box ...UFS box detectedBox firmware version: 208Searching for phone ...Phone found on FBUS interfaceReading phone info ...Type: RM-320Version: V 06wk41v51.3 13-02-08 RM-320 (c) NokiaIMEI: 355739020938274SP LOCK status:Config Key: 0000000000000000Provider Key: 2342000000000000Bloc ... readmore
Nokia Keypad IC finder
download
Nokia Key pad IC finder ... readmore
how to unlock n96.n85.5800zulea soft can't unlock this phones
use TRK or operator code
- Make CRT and Full PM BACKUP
- Flash phone with files from ANOTHER MODEL with same RAP/RAPIDO/Addresses who have not locked PM 308 write (use downgrade to flash)
- Unlock or repair phone now with my software v2.01
- Flash back wi ... readmore
succes flashing 5130c via usb
Detected P-KEY: 9001BD1E
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Sending RAW loader...
Using 06.02.002
Elf2flash 07.40.000
CMT RAW loader...
Patching RAW boot step1...
Patching RAW boot step2...
Patching RAW boot step3...
Sending R ... readmore
NOKIA 6500s-1 pinout (user code)
Here it is Jaf cable schematic for 6500slide:
http://www.one-stop-factory.com/big....8182scheme.gif
You only need to connect 7,5~10K resistor from BSI (pin 3) to GND (pin 2). The phone will enter in local mode, and now can be reseted by usb cable with jaf
Ps.
Don't forget to connect pin 1 (VBAT ... readmore
