5130 Contact Service 100% Ok..
___________________________
Just Follow these steps..
I soloved my phone's Contact service.... By following steps...
1. Backup of Rpl All Sections...
2. Backup Full Pm.
3. Go to Services\Imei Rebuild\ and Press Reset Npc.
4. Now Go to Flash\Advance\Press Get address\Unmark eprom and Mark Force Whole flash and
then press Erase Flash.
5. Go to flash menu select files for flashing. and Mark Erase and Skip if not empty.
6. Go to services\Imei rebuild and write rpl which has been back uped..
7. Now Go to services\Pm\ and select original pm file by pressing load from file. And press
PPm Auth.
8. Now Write pm if ask to rewrite simlock press no.
9. Now go to services\Action\and press Reset all.
10. Now Enjoy your phone is repaired.....
Sep 13, 2010
Related Posts
NOKIA RING SOLUTION by 3G
Click here to download this file
------------------------------------------------- ... readmore
all who have/had problems like: Phone start-up failedAll who have/had problems like:
Phone start-up failed
Config Key: 0000000000000000
Provider Key: 0000000000000000
... after unlock with version 2.00
1. This problems comes because your phone have PM120 and PM308 write protected
2. To recover your phone:
- Download latest version 2.01 from here:
h ... readmore
N95 8GB UNLOCK Successfully done.
Searching for UFS box ...UFS box detectedBox firmware version: 208Searching for phone ...Phone found on FBUS interfaceReading phone info ...Type: RM-320Version: V 06wk41v51.3 13-02-08 RM-320 (c) NokiaIMEI: 355739020938274SP LOCK status:Config Key: 0000000000000000Provider Key: 2342000000000000Bloc ... readmore
Nokia 2760-2660 full solution here
1..2670 camera solution
2...2670-2660 charging solutioun
3..2670-2660 earepeace solution..
4..2670-2660 mic solution
5..2760-2660 BUZZER SOLUTION
6..2760-2660 DISPLAY LIGHT SOLUTION
________________________________
links....
http://forum.gsmhosting.com/vbb/showthread.php?t=749916 ... readmore
NOKIA 6500s-1 pinout (user code)
Here it is Jaf cable schematic for 6500slide:
http://www.one-stop-factory.com/big....8182scheme.gif
You only need to connect 7,5~10K resistor from BSI (pin 3) to GND (pin 2). The phone will enter in local mode, and now can be reseted by usb cable with jaf
Ps.
Don't forget to connect pin 1 (VBAT ... readmore
NEW...::..BB5 120 FOR PM 120 REPAIR..... Working 100% TestedThis tool is for repairing config "000000000" on BB5+ unit with PM 120 Field damaged by other unlocking tools....
When your phone shows one of the followings after Unlock attempt with free soft or from any soft:contact service.
phone start up failed
Just blinks and does not start.
when the phone s ... readmore
Flash Erasing Guide Setup
Download Part 1
Download Part 2 ... readmore
All solution software nokia 5800 dead after flash
IF AFTER POWER VIBRA ONLY AND BLUE LIGHT :
FLASH ONLY BY MT BOX BY VERSION 10.0.010 0559066 - Euro2 RED
RM-356_10.0.010_prd.core.C00
RM-356_10.0.010_prd.rofs2.V02
RM-356_10.0.010.udaerase.fpsx
RM-356_10.0.010_red_prd.rofs3.fpsx
IF AFTER POWER PHONE ONLY DISPLAY BLUE LIGHT :
FLASH BY VER10 ... readmore
Nokia 5310 keypad 7-8-9 not workNokia 5310 keypad 7-8-9 not work
try here
... readmore- Nokia charging solutions by Mehmood Riaz.exeNokia charging solutions by Mehmood Riaz.exe
_________________________________
download ... readmore
